SCREW CAM CLAMP (Single Eye Type) PAT. [NEW]SSC0.5N / 1N / 2N
Features
- Most suitable for lifting-down a chain block/hoist structured steels and horizontally pulling structured steels.
- When used in horizontal pulling, screw can be easily tightened from the top (Operators can tighten the screw when installing on to the beam over the head).
- Attention: Tightening torque of the screw should be more than 25N・m (Abt.250kgf・cm).
View Catalog
Specifications
Material |
Special Alloy Steel |
Finish |
Champagne gold paint |
Product Specifications |
Capacity: 0.5 / 1 / 2ton |
Product Specifications |
Clamp Range: 0~25 / 0~40mm |
Product Specifications |
Attachment: 17x21 Double Ratchet Wrench (Short Type) |

Adobe Reader (Acrobat Reader) is required to access PDF files. Please click the button on the left to download and install the software if not installed.